Tudo
Pesquise Palavras-chave dos produtos
Digite a conta do endereço de e-mail
Stronghero3D PETG Impressora 3D Filamento 1.75mm 1kg para Creality3D ender3 Anet anycuby
Compartilhar com:

Stronghero3D PETG Impressora 3D Filamento 1.75mm 1kg para Creality3D ender3 Anet anycuby

- Preto Armazém Alemão
104792861348436498

Armazém alemão Transporte rápido Bom preço SEM impostos dentro do euro
5 12 Comentários dos Clientes | Consulte a descrição inglesa
11.99 $23.99 50% DE DESCONTO
Economize um extra para usar o aplicativo

Digitalize o código QR para comprar:

  • 1.Faça o download do nosso APP grátuito no Google Play ou na App Store.
  • 2.Inicie o App e digitalizar o código QR para comprar diretamente.

Siga os passos abaixo:

  • 1.Entre em Gearbest.com
  • 2.Adicionar o(s) produto (s) com marcado (s) para seu carrinho.
  • 3.Abra o nosso APP e vá para o seu carrinho.
  • 4.Pague pelo seu pedido para um desconto imediato!
Informações sobre impostos Proteção de preços Isenção de preço Garantia de Reparo de Um Ano Relatar Item
Produtos recomendados para você

Descrições

Principais características

Note: Buy more get better price !
Shipping fee rise little from 1kg to 20kgs.

Tips for Printing PETG
• Increase the nozzle temperature as per manufacturer recommendations (usually between 220 and 260 ºC), I will get cracking PETG printing when temperature lower than 240 ºC on my 3d printers.
• Increase the bed temperature as per manufacturer recommendations (usually between 50 and 85 ºC), some platform good for PLA but not for PETG, I will use PC sheet, acrylic plate and glass plate with PVB glue or hairspray on it.
• Decrease fan speeds to somewhere in the range of 20 to 50 %, there are too much different fan,12V or 24V, electric current ,different wind force, you need to do adjust according to your machine .
• Possibility of stringing, keep filament dry is necessary,
• Poor bridging characteristics, even poor infill for some 3d printers and slicers. When you see the extruder move faster on support and infill and slow on shell layer, you need to slow down the speed. Slice with simpliy3d I got a bad infill and support.

ABOUT PETG
PETG is a very tough material with good thermal resistance. Its use is universal but especially suitable for mechanical parts and both indoor and outdoor use. PETG has almost no warping, so printing large objects isn’t a problem. We use PETG to print parts for our printers!

PETG is one of our favorite materials for 3D printing. It’s almost as easy to print as PLA, but it can offer many mechanical properties that PLA prints just cannot achieve. The G in the acronym PETG stands for Glycol which is added during the manufacturing process. Glycol modifies the properties of PET, so that it’s easier to print, less brittle and clearer when printing with semi-transparent variants. PETG has low thermal expansion, so even when printing big objects, and without an enclosure, it rarely lifts from the bed and warps. In addition to that, PETG is ductile. It has a healthy amount of flex which can prevent parts from breaking under pressure.

Unlike PLA or ABS, PETG tends to ooze a bit and may leave strings of plastic on your print. You can fight this with increasing retraction and playing with hotend temperature, but if you use our filament presets in Slic3r or Prusa Control, we already did that for you and the amount of stringing is minimal. If you witness a tiny bit of stringing anyway, you can get rid of it by quickly blasting your finished prints with a heat gun.

If you can handle the oozing and strong adhesion, you’ll be left with a very durable print, that is considerably temperature resistant and usable for both indoor and outdoor use.

Especificação

Tamanho da embalagem (L x L x A)
20*20*5cm
Pesos De Pacote
1kg
conteúdo do pacote
1 rolo cada caixa
Veja mais

Acho que você gostou

Comentários dos Clientes

5 fora de 5
  • 12
  • 0
  • 0
  • 0
  • 0
Ver tudo 12 revisões Escreve comentário
  • Jean-Philippe
    très bon filament
    j'ai hésité de le commander car vu le prix, je pensais que c'etait du filament bas de gamme.Erreur c'est un très bon filament avec un noir brillant. Température de la tête 220 degrés et plateau 70. j'imprime à 60mm/s Max. Si votre objet depasse 3 cm de haut, prévoir de l'imprimer dans une enceinte fermée. Les couches reste bien collées. Refroidir à partir de la deuxième couches 30% maximum. Comme tout PTEG ça fait quelques filaments très fins lorsque du déplacement de la tête mais c'est minime. Je recommande.

    May 22,2020

  • Uncle G
    Great see thru green petg
    Got it printing great right off the bat, petg can be diffacult strings yes like most, but ok cool green, wound good no issuesused half reel already.

    Dec 19,2019

  • Sébastien
    très bon
    Bien emballé, sous vide avec un sachet pour l'humidité. utilisé sur une ender 3 avec une buse de 0.2, juste eu besoin d'un tube de colle en bâton pour l'accroche départ. j'ai utilisé les paramètres par défaut de Cura pour l'impression.

    Sep 13,2020

  • smohty
    DD
    Sehr schnelle Lieferung und ordentlich verpackt. Sehr gutes Preis Leistungsverhältnis.
    Ich habe schon ein paar Rollen von dem Filament bestellt. Eigentlich, für mich, sehr gut.
    Werde weiterhin bei "Stronghero3D" bestellen.

    Jul 20,2020

  • smohty
    DD
    Sehr schnelle Lieferung und ordentlich verpackt. Sehr gutes Preis Leistungsverhältnis.
    Ich habe schon ein paar Rollen von dem Filament bestellt. Eigentlich, für mich, sehr gut.
    Werde weiterhin bei "Stronghero3D" bestellen.

    Jul 20,2020

Produtos patrocinados relacionados a este item
Seus itens recentemente vistos

Veja recomendações personalizadas

Cliente novo? Começa aqui
Serviço de pré-venda